|
AegisGuard™ LS Radiation Shields are a safe, convenient and easy to apply spray that provides an unsurpassed level of shielding protection from the radiation emitted by any electronic product operating at the frequencies and power levels shown below. The applications for AegisGuard™ LS Radiation Shields are virtually unlimited.
AegisGuard™ LS Radiation Shields
Specifications |
| |
Operating
Frequency |
Maximum Radiated Output
Power Level Tested |
Shielding
Effectiveness |
| 5 Hz. to 100 Hz. |
25.0 Watts |
Up to 99.998% |
| Up to 2.6 GHz. |
25.0 Watts |
Up to 99.996% |
| Up To 7.2 GHz. |
25.0 Watts |
Up to 99.993% |
| Up to 15 GHz. |
25.0 Watts |
Up to 99.990% |
| Environmental: |
|
| Temperature - After Installation |
-20 o to +140 oF |
| Minimum Storage Temperature |
65 oF |
When properly applied it provides outstanding radiation shielding protection within the supported frequency ranges without affecting product performance, power consumption, or wireless product signal strength. Since the appearance of electronic products such as cellular phones are not altered, it is also the perfect precautionary safety measure for protecting children who resist changing the appearance of the products they use.
One spray application is required for surfaces such as painted ceilings, walls, and many products found in homes, offices and factories that are never washed or become wet. AegisGuard™ LS should be reapplied to frequently handled products periodically such as wireless phones, handhelds, pagers and headsets that are not used with a protective outer case, and it must be reapplied if the product is washed or becomes wet from excessive sweat, rain, etc. The use of a protective outer case with these types of products is recommended if you sweat heavily.
The following recommendations are provided for your safety to ensure optimum shielding effectiveness and protection at all times when using frequently handled wireless products. For reference and depending upon its dimensions, a cellular phone can be sprayed 15 - 20 times and a typical pager can be sprayed 40 times using a 1 FL OZ bottle. A typical tower computer requires one 2 FL OZ to spray the front and one side, while an 8 x 10 foot wall or ceiling requires four 8 FL OZ bottles.
Hypoallergenic AegisGuard™ LS Radiation Shields do not contain any animal by-products, fluorocarbons, Nickel or MDF , nor is it harmful to humans or animals in any manner whatsoever. It is completely safe to use and t here has never been an allergic reaction or an effect upon wireless product signal strength or the skin reported by any user. Simply spray your electronic product with the power off and wipe dry. It will not stain any fabric after your electronic product is wiped dry and although it is safe enough to leave on your skin, it completely washes off with soap and warm water. It easily washes out of most fabrics with warm water and laundry detergent if a cloth is used to wipe the product dry instead of a paper towel. AegisGuard™ LS Radiation Shields are compatible with all other AegisGuard™ radiation shielding products.
|